Industrial Epoxy Flooring

Phoenix One-Step is Cost Effective:

•	Quick one-step installation - saves time and money. Sealer coat is optional.
•	Installs in less than one day vs. other types of flooring which take 3-4 days.
•	Tough wearing surface requires no periodic resealing.
•	Can be applied over existing flooring such as wood, metal, concrete, quarry and ceramic tile, VAT, VCT and sheet vinyl thus eliminating the cost of removing the old floor.
•	Less expensive over a lifetime compared to most flooring surfaces.
•	Lightweight, troweled thickness is only 1/8" to 3/16" (3.2 - 4.8 mm)
•	Rapid cure time reduces costly downtime.

Phoenix One-Step is Easy to Apply:

•	Versatile, easy handling, and packaged in kits.
•	Resin rich formula is easy to trowel and will not stick to tools.
•	Aggregate is sized to gauge application thickness.
•	Can be applied vertically for base cove applications and even stairs.
•	Substrates may be filled, leveled, or pitched.
•	Can be installed over any clean, sound and dry surface - thus eliminating the need for removing the old flooring.

Phoenix One-Step is Non-Toxic and Non-Polluting:

•	Non-toxic with no objectionable odors and does not require forced air ventilation or the wearing of respirators.
•	No risk of contamination of foodstuffs.
•	Inherent anti-microbial properties.
•	No volatile organic compounds (VOCs).
•	Bacteria will not penetrate, unlike concrete or grouted tile.

Phoenix One-Step has Excellent Physical Properties:

•	Ideal for Commercial, Institutional and Industrial applications in areas requiring durability, easy maintenance, a high degree of sanitation, attractive appearance, and high resistance to chemicals, corrosives, or heat.
•	Excellent low temperature properties in cold temperature environments.
•	Unlimited life expectancy with proper maintenance.
•	Only 4.8 mm (3/16 inch) to 3.2 mm (1/8 inch) in thickness.
•	Tremendous bonding strength to a variety of substrates.
•	Seamless. No joints or seams for water penetration.
•	Non-porous and non-absorbent -- thus it's sanitary, and easily cleaned with just a mop.
•	Corrosive/acid/oil/abrasion/impact resistant.
•	Non-conductive.
•	Non-toxic (and no smell during mixing and lay-down -- no VOCs).
•	Flexible (flexes with movement to include onboard ships).
•	Shock resistant.
•	Heat resistant.
•	Slip resistant - even when wet.
•	No delamination.
•	Fire-resistant, non-conductive, extremely resistant to chemicals.

Phoenix One-Step Meets Various Government Approved Standards:

•	Department of Defense Mil-Spec approved
•	U.S.D.A. approved.
•	Meets FDA, USDA, ADA and EPA standards.

Phoenix One-Step is Attractive:

•	Terrazzo/marble appearance is available in a number of styles and colors, and patterns. Picture frame bordering effects and other designs can be produced. It is an outstanding floor system for any area where a highly decorative floor is desired.

Specifications:

•	ASTM C-579	Compressive Strength	17,000 psi - 7 days
•	ASTM C-307	Tensile Strength	7,100 psi - 7 days
•	ASTM C-580	Flexural Strength	10,000 psi - 7 days
•	ASTM D-4551	Bond Strength	>500 psi, concrete failure
•	ASTM D-2794	Impact Resistance	24,000 psi
•	ASTM D-2794	Indentation	shall not exceed 1%
•	ASTM D-696	Coefficient of Linear Expansion	2.5 x 10-5
•	ASTM D-570	Flammability	Self Extinguishing
•	ASTM C-501	Abrasion Resistance	.018 gm
•	ASTM D-570	Critical Radiant Flux	> 1.07 w/cm2
•	ASTM E-662	Smoke Density	<3
•	ASTM E-84A	Flame Spread	Class A,<3
•	ASTM D2794	Weight	1.17 lbs/ft2 @ 1/8 "
•	ASTM D-570	Water Absorption	<0.2%
•	ASTM D-2047	Slip Resistance	ADA Compliant
•	ASTM D-2794	Temperature Resistance	150 - 200 degrees F

| | |
| | |